Log In

Register

Recover Password

2021 Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic Salary Guide

Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic Salary

Salary

$37K

Growth

-8%

Bright Outlook

Below Average

Green

No

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic Job Description

Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.

Also known as:

Die Setter, Fabrication Operator, Machine Operator, Machine Setter, Press Operator, Punch Press Operator, Saw Operator, Set-Up Operator, Slitter Operator

How Much Do Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic Make ? 2021

Percentile 10% 25% 50% (Median) 75% 90%
Annual Wage $26,400 $30,440 $36,980 $45,630 $54,630
Hourly Wage $12.69 $14.63 $17.78 $21.94 $26.26

How Much Do Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic Make ? 2021

Percentile
10%
25%
50% (Median)
75%
90%
Annual Wage
$26,400
$30,440
$36,980
$45,630
$54,630
Hourly Wage
$12.69
$14.63
$17.78
$21.94
$26.26

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic Tasks

  • Examine completed workpieces for defects, such as chipped edges or marred surfaces and sort defective pieces according to types of flaws.
  • Examine completed workpieces for defects, such as chipped edges or marred surfaces and sort defective pieces according to types of flaws.
  • Measure completed workpieces to verify conformance to specifications, using micrometers, gauges, calipers, templates, or rulers.
  • Set stops on machine beds, change dies, and adjust components, such as rams or power presses, when making multiple or successive passes.
  • Start machines, monitor their operations, and record operational data.
  • Start machines, monitor their operations, and record operational data.
  • Start machines, monitor their operations, and record operational data.
  • Set up, operate, or tend machines to saw, cut, shear, slit, punch, crimp, notch, bend, or straighten metal or plastic material.
  • Test and adjust machine speeds or actions, according to product specifications, using gauges and hand tools.
  • Test and adjust machine speeds or actions, according to product specifications, using gauges and hand tools.
  • Install, align, and lock specified punches, dies, cutting blades, or other fixtures in rams or beds of machines, using gauges, templates, feelers, shims, and hand tools.
  • Read work orders or production schedules to determine specifications, such as materials to be used, locations of cutting lines, or dimensions and tolerances.
  • Read work orders or production schedules to determine specifications, such as materials to be used, locations of cutting lines, or dimensions and tolerances.
  • Position guides, stops, holding blocks, or other fixtures to secure and direct workpieces, using hand tools and measuring devices.
  • Position, align, and secure workpieces against fixtures or stops on machine beds or on dies.
  • Position, align, and secure workpieces against fixtures or stops on machine beds or on dies.
  • Load workpieces, plastic material, or chemical solutions into machines.
  • Adjust ram strokes of presses to specified lengths, using hand tools.
  • Clean and lubricate machines.
  • Clean and lubricate machines.
  • Mark identifying data on workpieces.
  • Scribe reference lines on workpieces as guides for cutting operations, according to blueprints, templates, sample parts, or specifications.
  • Turn controls to set cutting speeds, feed rates, or table angles for specified operations.
  • Clean work area.
  • Place workpieces on cutting tables, manually or using hoists, cranes, or sledges.
  • Plan sequences of operations, applying knowledge of physical properties of workpiece materials.
  • Turn valves to start flow of coolant against cutting areas or to start airflow that blows cuttings away from kerfs.
  • Thread ends of metal coils from reels through slitters and secure ends on recoilers.
  • Operate forklifts to deliver materials.
  • Grind out burrs or sharp edges, using portable grinders, speed lathes, or polishing jacks.
  • Grind out burrs or sharp edges, using portable grinders, speed lathes, or polishing jacks.
  • Remove housings, feed tubes, tool holders, or other accessories to replace worn or broken parts, such as springs or bushings.
  • Remove housings, feed tubes, tool holders, or other accessories to replace worn or broken parts, such as springs or bushings.
  • Lubricate workpieces with oil.
  • Replace defective blades or wheels, using hand tools.
  • Set blade tensions, heights, and angles to perform prescribed cuts, using wrenches.
  • Select, clean, and install spacers, rubber sleeves, or cutters on arbors.
  • Select, clean, and install spacers, rubber sleeves, or cutters on arbors.
  • Select, clean, and install spacers, rubber sleeves, or cutters on arbors.
  • Hand-form, cut, or finish workpieces, using tools such as table saws, hand sledges, or anvils.
  • Preheat workpieces, using heating furnaces or hand torches.
  • Sharpen dulled blades, using bench grinders, abrasive wheels, or lathes.
  • Sharpen dulled blades, using bench grinders, abrasive wheels, or lathes.
  • Hone cutters with oilstones to remove nicks.

What Activities Do Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic Do?

  • Inspect metal, plastic, or composite products.
  • Sort materials or products for processing, storing, shipping, or grading.
  • Measure dimensions of completed products or workpieces to verify conformance to specifications.
  • Set equipment guides, stops, spacers, or other fixtures.
  • Monitor equipment operation to ensure that products are not flawed.
  • Record operational or production data.
  • Operate cutting equipment.
  • Operate cutting equipment.
  • Operate cutting equipment.
  • Inspect production equipment.
  • Mount attachments or tools onto production equipment.
  • Read work orders or other instructions to determine product specifications or materials requirements.
  • Review blueprints or other instructions to determine operational methods or sequences.
  • Set equipment guides, stops, spacers, or other fixtures.
  • Align parts or workpieces to ensure proper assembly.
  • Mount materials or workpieces onto production equipment.
  • Load materials into production equipment.
  • Operate metal or plastic forming equipment.
  • Clean production equipment.
  • Lubricate production equipment.
  • Mark products, workpieces, or equipment with identifying information.
  • Draw guide lines or markings on materials or workpieces using patterns or other references.
  • Set equipment controls to meet cutting specifications.
  • Clean work areas.
  • Mount materials or workpieces onto production equipment.
  • Plan production or operational procedures or sequences.
  • Adjust equipment controls to regulate coolant flow.
  • Feed materials or products into or through equipment.
  • Operate forklifts or other loaders.
  • Smooth metal surfaces or edges.
  • Operate grinding equipment.
  • Remove accessories, tools, or other parts from equipment.
  • Disassemble equipment for maintenance or repair.
  • Apply lubricants or coolants to workpieces.
  • Replace worn equipment components.
  • Set equipment controls to meet cutting specifications.
  • Clean production equipment.
  • Mount attachments or tools onto production equipment.
  • Select production equipment according to product specifications.
  • Cut industrial materials in preparation for fabrication or processing.
  • Heat material or workpieces to prepare for or complete production.
  • Sharpen cutting or grinding tools.
  • Operate grinding equipment.
  • Sharpen cutting or grinding tools.

Typical Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic Knowledge?

  • Mechanical - Knowledge of machines and tools, including their designs, uses, repair, and maintenance.

What Are Typical Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic Abilities?

  • Arm-Hand Steadiness - Keeping your arm or hand steady.
  • Control Precision - Quickly changing the controls of a machine, car, truck or boat.
  • Near Vision - Seeing details up close.
  • Reaction Time - Quickly moving your hand, finger, or foot based on a sound, light, picture or other command.
  • Problem Sensitivity - Noticing when problems happen.
  • Manual Dexterity - Holding or moving items with your hands.

What Are Typical Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic Skills? 2021

  • Operation Monitoring - Watching gauges, dials, or display screens to make sure a machine is working.
  • Operation and Control - Using equipment or systems.

What Are Typical Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic Interests?

  • Conventional - Occupations related to Conventional interests frequently involve following set procedures and routines. They include working with data and details more than with ideas. Usually there is a clear line of authority to follow.
  • Realistic - Occupations with Realistic interests frequently involve practical, hands-on problems and solutions. They often deal with plants, animals, and real-world materials like wood, tools, and machinery. Many require working outside, and do not involve a lot of paperwork or working closely with others.

What Is The Projected Employment For Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic ? 2021

Location 2019 Employment 2029 Employment Percent change Annual projected job openings
United States 195,700 179,400 -8% 16,000

What Is The Projected Employment For Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic ? 2021

Location
2019 Employment
2029 Employment
Percent change
Annual projected job openings
United States
195,700
179,400
-8%
16,000

What Is The Required Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic Education & Experience? 2021

  • High school diploma or equivalent
  • No work experience
  • 1 to 12 months on-the-job training

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic Schools ?

School Program Name Location Length / Graduates
Academia Serrant Inc Machine Tool Technology/Machinist Ponce, PR Less than one year: 22
Aiken Technical College Machine Tool Technology/Machinist Graniteville, SC Less than one year: 0
Alexandria Technical & Community College Machine Tool Technology/Machinist Alexandria, MN 2 years: 0
At least two but less than four years: 16
Allan Hancock College Machine Tool Technology/Machinist Santa Maria, CA 2 years: 5
At least one but less than two years: 0
Less than one year: 5
Alpena Community College Machine Tool Technology/Machinist Alpena, MI 2 years: 0
At least one but less than two years: 0
Amarillo College Machine Tool Technology/Machinist Amarillo, TX 2 years: 5
At least one but less than two years: 13
Less than one year: 11
American River College Sheet Metal Technology/Sheetworking Sacramento, CA 2 years: 0
At least one but less than two years: 37
Angelina College Machine Tool Technology/Machinist Lufkin, TX 2 years: 1
At least one but less than two years: 2
Anoka Technical College Machine Tool Technology/Machinist Anoka, MN At least one but less than two years: 0
Less than one year: 19
Arkansas State University Mid-South Machine Tool Technology/Machinist West Memphis, AR Less than one year: 2

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic Schools ?

School
Program Name
Location
Length / Graduates
Machine Tool Technology/Machinist
Ponce, PR
Less than one year: 22
Machine Tool Technology/Machinist
Graniteville, SC
Less than one year: 0
Machine Tool Technology/Machinist
Alexandria, MN
2 years: 0
At least two but less than four years: 16
Machine Tool Technology/Machinist
Santa Maria, CA
2 years: 5
At least one but less than two years: 0
Less than one year: 5
Machine Tool Technology/Machinist
Alpena, MI
2 years: 0
At least one but less than two years: 0
Machine Tool Technology/Machinist
Amarillo, TX
2 years: 5
At least one but less than two years: 13
Less than one year: 11
Sheet Metal Technology/Sheetworking
Sacramento, CA
2 years: 0
At least one but less than two years: 37
Machine Tool Technology/Machinist
Lufkin, TX
2 years: 1
At least one but less than two years: 2
Machine Tool Technology/Machinist
Anoka, MN
At least one but less than two years: 0
Less than one year: 19
Machine Tool Technology/Machinist
West Memphis, AR
Less than one year: 2

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic Jobs Near Me .

Job Title Company Location Date Posted Federal Contractor
Assistant Press Operator RR Donnelley St Charles, Illinois 06/15/2021 Yes
Band Saw Operator Signode Industrial Group Woodland, Washington 06/14/2021 No
Machine Operator Randstad Fort Worth, Texas 06/14/2021 Yes
Machine Operator Aerotek Columbus, Ohio 06/14/2021 Yes
Machine Operator - 12-Hour Day & Night Shift Kelly Services Humboldt, Tennessee 06/15/2021 Yes
Machine Operator- 2nd and 3rd Shift Kelly Services Battleboro, North Carolina 06/15/2021 Yes
Press Line Operator PSG Global Solutions Chanhassen, Minnesota 06/14/2021 No
Saw Operator SERVICE TEMPS INC CLEBURNE, Texas 06/14/2021 No
Saw Operator TEC Group Inc Shelby Township, Michigan 06/14/2021 No
Saw Operator TEC Group Inc Shelby Township, Michigan 06/14/2021 No

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic Jobs Near Me .

Job Title
Company
Location
Date Posted
Federal Contractor
RR Donnelley
St Charles, Illinois
06/15/2021
Yes
Signode Industrial Group
Woodland, Washington
06/14/2021
No
Randstad
Fort Worth, Texas
06/14/2021
Yes
Aerotek
Columbus, Ohio
06/14/2021
Yes
Kelly Services
Humboldt, Tennessee
06/15/2021
Yes
Kelly Services
Battleboro, North Carolina
06/15/2021
Yes
PSG Global Solutions
Chanhassen, Minnesota
06/14/2021
No
SERVICE TEMPS INC
CLEBURNE, Texas
06/14/2021
No
TEC Group Inc
Shelby Township, Michigan
06/14/2021
No
TEC Group Inc
Shelby Township, Michigan
06/14/2021
No

Cutting, Punching, and Press Machine Setters, Operators, and Tenders, Metal and Plastic 2021 Salary Guide By State

Common Careers